Please use this identifier to cite or link to this item:
Hawaii Deep Water Cable Program, phase II : Laboratory test protocol
|Title:||Hawaii Deep Water Cable Program, phase II : Laboratory test protocol|
|Authors:||Pirelli Cable Corporation and Societa Cavi Pirelli|
|Issue Date:||May 1986|
|Publisher:||Pirelli Cable Corporation and Societa Cavi Pirelli|
|Citation:||Pirelli Cable Corporation and Societa Cavi Pirelli. 1986. Hawaii Deep Water Cable Program, phase II : Laboratory test protocol. Pirelli Cable Corporation and Societa Cavi Pirelli.|
|Abstract:||The objective of the laboratory test program is to demonstrate that the selected cable and joints are capable of withstanding the expected mechanical stresses and environmental conditions to be encountered during deployment, retrieval and in operation while retaining the electrical characteristics necessary for a service life exceeding 30 years. In addition, the objective is to obtain data to optimize the final cable system design. Routine and Type (Qualification) Tests, based on Electra No. 68 and No. 72, will be performed by the manufacturer on full cable lengths or on sample cable lengths, as applicable, from the same production lot as will be used for the laboratory test program. A detailed description of the qualification tests is included in Appendix A for|
|Appears in Collections:||The Geothermal Collection|
Please contact email@example.com if you need this content in an alternative format.
Items in ScholarSpace are protected by copyright, with all rights reserved, unless otherwise indicated.