Development of High Performance Hierarchical Multi-Functional Ceramic Nanocomposites Employing Carbon-Nanotube Nanoforest and Pre-Ceramic Polymers

Date
2020
Authors
Shay, Eldridge I.
Contributor
Advisor
Nejhad, Mehrdad G.
Department
Mechanical Engineering
Instructor
Depositor
Speaker
Researcher
Consultant
Interviewer
Annotator
Journal Title
Journal ISSN
Volume Title
Publisher
Volume
Number/Issue
Starting Page
Ending Page
Alternative Title
Abstract
This work presents the effects of continuous fiber-reinforced ceramic composites (CFCCs) under various applications and testing and processing conditions. The mechanical performance of the CFCCs developed using nanotechnology was investigated for their utility in complex structures used in space, aerospace, chemical processing, electronics, defense, and renewable energy and thus demonstrated in the manufacture of a sandwich structure as a prototyping exercise. The effects of microparticle, nanoparticle, and carbon nanotube reinforcements on processing and flexural mechanical performance of CFCCs using PIP have been reported here in an experimental investigation. Characterization analysis of the samples using scanning electron microscopy were also conducted and reported here. Several systems of CFCC’s utilizing Toray® T300 plain weave carbon fiber (CF) fabric, SiC-β phase nanoparticles (NPs) and microparticles (MPs), carbon nanotube Nanoforests (NFs), and hybrid systems of pre-ceramic polymers (i.e., Starfire PCS SMP-10 and Polyramic SPR-212) were manufactured and tested using a 4-point bending method, single lap shear method, and single specimen double shear bolted joint method. Four-point bending test [1] was also conducted at room temperature to evaluate the flexural mechanical performance of six different CFCC’s (i.e., those with MPs and NPs, with NFs, with sizing and those without), demonstrating that CFCC’s utilizing 2-μm SiC-β MPs and 55 nm SiC-β NPs along with 30-40 μm Nanoforest can yield an increases in flexural strength and toughness. The high performing CFCC was later used to make a Whiffle Plate sandwich structure. This research successfully demonstrated the applicability of the pre-ceramic polymer SMP-10 loaded with 45% SiC MPs as an MP-Micro-adhesive (i.e., SMP-10 with MPs) to join the manufactured Whiffle plate face-sheets to the carbon honeycomb core. In the final phase of this research, the bonded and bolted hybrid nanocomposite specimens were manufactured and tested using ASTM standards for single-lap shear joints and bolted joints, further revealing the superior performances of the adhesives using NFs and of the nanocomposites using NFs.
Description
Keywords
Mechanical engineering, Materials Science, continuous fiber ceramic composites, Nanoforest, nanoparticles, Nanoresin, polymer infiltration pyrolysis, preceramic polymers
Citation
Extent
280 pages
Format
Geographic Location
Time Period
Related To
Table of Contents
Rights
All UHM dissertations and theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission from the copyright owner.
Rights Holder
Local Contexts
Email libraryada-l@lists.hawaii.edu if you need this content in ADA-compliant format.