Application of IC Implemented Phase-Locked Loop System to Recover Information from Noise

Date
2014-01-15
Authors
Scott, Douglas
Contributor
Advisor
Department
Engineering
Instructor
Depositor
Speaker
Researcher
Consultant
Interviewer
Annotator
Journal Title
Journal ISSN
Volume Title
Publisher
University of Hawaii at Manoa
Volume
Number/Issue
Starting Page
Ending Page
Alternative Title
Abstract
This paper describes the design and operation of a practical IC implemented phase-locked loop system capable of indicating phase changes in a noisy slowly varying DC signal of period, T = 18 sec., by providing a logic compatible square or triangular wave output which is locked in phase with the input signal. The results of tests indicate that the practical PLL system performed satisfactorily under normal operating conditions. The extremely low average phase error of +5 degrees between the noisy input and the PLL output signals, which is well within the desired limit of +/- 10 degrees, indicates the high degree of accuracy made possible with the use of the highly stable IC implemented PLL design. This shows that a practical IC implemented phase-locked loop can be designed and used to accurately track and clean up a low frequency noisying input signal to recover information from noise.
Description
Keywords
Citation
Extent
28 pages
Format
Geographic Location
Time Period
Related To
Table of Contents
Rights
All UHM Honors Projects are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission from the copyright owner.
Rights Holder
Local Contexts
Email libraryada-l@lists.hawaii.edu if you need this content in ADA-compliant format.