Please use this identifier to cite or link to this item:
Characterization of underwater acoustic sources recorded in reverberant environments with application to scuba signatures
|Gemba Kay r.pdf||Version for non-UH users. Copying/Printing is not permitted||2.19 MB||Adobe PDF||View/Open|
|Gemba Kay uh.pdf||Version for UH users||2.5 MB||Adobe PDF||View/Open|
|Title:||Characterization of underwater acoustic sources recorded in reverberant environments with application to scuba signatures|
|Authors:||Gemba, Kay Leonard|
|Keywords:||underwater acoustic sources|
|Date Issued:||Dec 2014|
|Publisher:||[Honolulu] : [University of Hawaii at Manoa], [December 2014]|
|Abstract:||The ability to accurately characterize an underwater sound source is an important prerequisite for many applications including detection, classification, monitoring and mitigation. Unfortunately, anechoic underwater recording environments, required to make ideal recordings, are generally not available. Current methods adjust source recordings with spatially averaged estimates of reverberant levels. However, adjustments can introduce significant errors due to a high degree of energy variability in reverberant enclosures and solutions are inherently limited to incoherent approximations. This dissertation introduces an approach towards a practical, improved procedure to obtain an anechoic estimate of an unknown source recorded in a reverberant environment. Corresponding research is presented in three self-contained chapters. An anechoic estimate of the source is obtained by equalizing the recording with the inverse of the channel's impulse response (IR). The IR is deconvolved using a broadband logarithmic excitation signal. The length of the IR is estimated using methods borrowed from room acoustics and inversion of non-minimum phase IR is accomplished in the least-squares sense. The proposed procedure is validated by several experiments conducted in a reverberant pool environment. Results indicate that the energy of control sources can be recovered coherently and incoherently with root-mean-square error (RMSE) of-70 dB (10-70 kHz band). The proposed method is subsequently applied to four recorded SCUBA configurations. Results indicate that reverberation added as much as 6.8 dB of energy. Mean unadjusted sound pressure levels (0.3-80 kHz band) were 130 5.9 dB re 1 Pa at 1 m. While the dereverberation method is applied here to SCUBA signals, it is generally applicable to other sources if the impulse response of the recording channel can be obtained separately. This dissertation also presents an approach to separate all coloration from the deconvolved IR. This method can be used to estimate the channel's IR or the magnitude spectrum of the combined electrical equipment. The procedure is validated using synthetic results of an imagesource model and the channel's IR is recovered over the full band with a RMSE of-31 dB.|
|Description:||Ph.D. University of Hawaii at Manoa 2014.|
Includes bibliographical references.
|Rights:||All UHM dissertations and theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission from the copyright owner.|
|Appears in Collections:||
Ph.D. - Ocean and Resources Engineering|
Please email firstname.lastname@example.org if you need this content in ADA-compliant format.
Items in ScholarSpace are protected by copyright, with all rights reserved, unless otherwise indicated.