Simplified procedure for analysis of laterally loaded single piles and pile groups

Date
2003-05
Authors
Chang, Brian K.F.
Contributor
Advisor
Ooi, Phillip
Department
Civil Engineering
Instructor
Depositor
Speaker
Researcher
Consultant
Interviewer
Annotator
Journal Title
Journal ISSN
Volume Title
Publisher
University of Hawaii at Manoa
Volume
Number/Issue
Starting Page
Ending Page
Alternative Title
Abstract
Current methods for designing pile groups for lateral loading require a computer program or extensive manual computations. This research presents a spreadsheet- or calculator-amenable approach for estimating lateral deflections and maximum moments in single piles and pile groups. The approach for single piles is an extension of the characteristic load method, used for predicting deflections and moments when the pile top is at the ground surface. The proposed method applies to embedded fixed-head piles, which represents most practical situations. The resulting lateral deflections and moments are less due to the increased embedment. A simplified procedure to estimate group deflections and moments was also developed. Termed the Group Amplification Method (GAM), group amplification factors are introduced to amplify the single pile deflection and bending moment to reflect group effects. This approach provides good agreement with other generally accepted analytical tools and with values measured in load tests on groups of fixed-head piles.
Description
x, 62 leaves
Keywords
Citation
Extent
Format
Geographic Location
Time Period
Related To
Theses for the degree of Master of Science (University of Hawaii at Manoa). Civil Engineering; no. 3767
Table of Contents
Rights
All UHM dissertations and theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission from the copyright owner.
Rights Holder
Local Contexts
Email libraryada-l@lists.hawaii.edu if you need this content in ADA-compliant format.