ScholarSpace will be brought offline for upgrades on Wednesday December 9th at 11AM HST. Service will be disrupted for approximately 2 hours. Please direct any questions to

Show simple item record

Item Description Bell, Jodie M. en_US 2011-07-21T23:08:11Z 2011-07-21T23:08:11Z 2008 en_US
dc.identifier.isbn 9780549780670 en_US
dc.description Thesis (Ph.D.)--University of Hawaii at Manoa, 2008. en_US
dc.description Many low-profile, broadband antennas that operate in the relatively low frequency ranges desired for certain mobile RADAR and electronic warfare (EW) applications radiate bi-directionally. Thus, a low-profile, ultrawideband ground plane is clearly necessary to back these antennas and provide for enhanced performance. To achieve the desired performance with minimal limitations, it is logical to lean towards a hybrid design that implements a combination of ground plane options. With a hybrid approach ultrawideband operation can be achieved in a low-profile package. en_US
dc.description This dissertation presents the design and analysis of a low-profile, ultrawideband hybrid EBG/ferrite structure. The hybrid structure consists of an EBG structure implemented with a slab of ferrite absorber resting on the backing of the structure. Reflectivity and phase simulation analyses indicate that the hybrid structure offers ultrawideband operation beginning in the hundreds of megahertz, achieving an operational bandwidth exceeding 40:1 starting at 120 MHz. Simulation analyses of the hybrid structure implemented with Raytheon's ultrawideband long slot array antenna further validate the performance of the hybrid structure. An equivalent circuit model of the hybrid structure was developed to provide a more in-depth understanding of the operation of the structure in regards to its dimensions and material properties. It is shown that unlike the circuit models for traditional EBG structures, the circuit model developed for the hybrid structure contains a resistance representing the permeability losses due to the ferrite. Additionally, it is shown that the inductive and resistive circuit components are frequency dependent and depend on the frequency dependent characteristics of the ferrite. A transverse electromagnetic (TEM) cell was designed and fabricated to experimentally analyze the performance of the hybrid structure. Presented experimental results of the reflectivity and phase analyses show good correlation with the simulated results. Experimental analyses of the surface-wave suppression capabilities of the hybrid structure indicate suppression of at least 20dB across the band and suppression exceeding 60dB in the "EBG structure" region of operation compared to an electric conductor. Thus, the implementation of the hybrid EBG/ferrite structure as a ground plane will allow for the practical and effective implementation of new ultrawideband antenna systems. en_US
dc.description Includes bibliographical references (leaves 128-130). en_US
dc.description Also available by subscription via World Wide Web en_US
dc.description 130 leaves, bound 29 cm en_US
dc.language.iso en-US en_US
dc.relation Theses for the degree of Doctor of Philosophy (University of Hawaii at Manoa). Electrical Engineering; no. 5093 en_US
dc.rights All UHM dissertations and theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission from the copyright owner. en_US
dc.title Development of metamaterials for wideband antenna applications en_US
dc.type Thesis en_US
dc.type.dcmi Text en_US

Item File(s)

Description Files Size Format View
Restricted for viewing only HAWN_AC1.H3_5093_r.pdf 11.83Mb PDF View/Open
For UH users only HAWN_AC1.H3_5093_uh.pdf 11.83Mb PDF View/Open

This item appears in the following Collection(s)

Show simple item record


Advanced Search


My Account